氯乙烯变温吸附装置的研究

介绍了采用变温吸附技术对氯乙烯进行干燥脱水的工艺流程及运行效果,阐述了变温吸附装置运行过程中出现的问题及相应的解决方法。     

卡尔费休法测定液态氯乙烯中水含量的研究

采用卡尔费休法测定了液态氯乙烯单体中的水含量。试验确定了采样工具、样品的预处理方式及选用溶剂的最优方案,并进行了精密度与准确度的验证。结果表明卡尔费休法测定液态氯乙烯单体中的水含量准确、快速,可以用来准确、及时地指导生产。     

Imidazolium functionalized poly(vinyl alcohol) membranes for direct methanol alkaline fuel cell applications

In this study, imidazolium functionalized poly(vinyl alcohol) (PVA) was synthesized by acetalization and direct quaternization reaction. Afterwards, composite anion exchange membranes based on imidazolium‐ and quaternary ammonium‐ functionalized PVA were used for direct methanol alkaline fuel cell applications. ¹H NMR and Fourier transform infrared spectroscopy data indicated that imidazole functionalized PVA was successfully synthesized. Inductively coupled plasma mass spectrometry data demonstrated that the imidazolium structure was efficiently obtained by direct quaternization of the imidazole group. Composite anion exchange membranes were fabricated by application of the functionalized PVA solution on the surface of porous polycarbonate (PC) membranes. Fuel cell related properties of all prepared membranes were investigated systematically. The imidazolium functionalized composite membrane (PVA‐Im/PC) exhibited higher ionic conductivity (7.8 mS cm^?1 at 30 °C) despite a lower water uptake and ion exchange capacity value compared to that of quaternary ammonium. In addition, PVA‐Im/PC showed the lowest methanol permeation rate and the highest membrane selectivity as well as high alkaline and oxidative stability. Dynamic mechanical analysis results reveal that both composite membranes were mechanically resistant up to 10⁷ Pa at 140 °C. The superior performance of imidazolium functionalized PVA composite membrane compared to quaternary ammonium functionalized membrane makes it a promising candidate for direct methanol alkaline fuel cell applications. © 2020 Society of Chemical Industry     

Do people put more value on electricity produced using waste-to-hydrogen? Findings from South Korea

South Korea is pushing for the waste-to-hydrogen (W2H) project to reduce greenhouse gases and utilize plastic and vinyl waste (PVW) while reducing environmental pollution from PVW. This research seeks to estimate additional willingness to pay (WTP) for electricity produced using W2H over that produced using traditional power sources, such as coal and nuclear. For the purpose of the estimation, a contingent valuation survey of 1000 people was performed employing the closed-ended one-and-one-half-bound question during November 2020. A spike model is utilized to reflect zero WTP values that a number of interviewees reported in the survey. Several factors affecting the additional WTP were also analyzed to derive implications. The average WTP was computed as KRW 27.7 (USD 0.025) per kWh with statistical significance, which reaches 26.4% of the electricity price. One more point to note is that 54.3% of the respondents stated a zero WTP as they thought that W2H is of no value to them or were worried that the W2H project could increase electricity bills.     

含氟无皂乳液P(CTFE-IBVE-SUA)的合成及性能研究

通过无皂乳液聚合法制备得到聚(三氟氯乙烯-乙烯基异丁基醚-十一烯酸钠)[P(CTFE-IBVE-SUA)]含氟乳液。考察了单体配比对聚合反应的影响,研究了SUA用量对乳液及聚合物性能的影响,并对聚合物的结构及乳胶粒的形貌进行了测定。结果表明:含氟无皂乳液P(CTFE-IBVE-SUA)的稳定性好、粒径分布均匀;改变单体配比中IBVE和CTFE的比例可以得到不同结构的含氟聚合物乳液;SUA用量对乳液的稳定性、乳胶粒的粒径大小及粒径分布、聚合物膜与水的接触角都有很大的影响;制得的乳液具有明显的核壳结构。     

淀粉/聚乙烯醇活性包装薄膜及其在食品包装应用中的研究进展

综述了淀粉/聚乙烯醇（PVA）活性包装薄膜及其在食品包装中的研究进展，主要对从不同比例共混、疏水改性、增强改性等方面对淀粉/PVA薄膜的改性研究，从功能特性和活性物质对薄膜性能的影响2个方面对淀粉/PVA活性薄膜研究和薄膜在食品包装中的应用3个方面进行了归纳总结，旨在为以淀粉/PVA为基材的活性包装薄膜研究提供参考。     

PVC⁃U排水管道中重金属铅的浸出研究

研究了3种添加铅稳定剂的铅总量和硬聚氯乙烯（PVC?U）管道产品在不同时间，温度及pH下的浸出规律，并讨论了浸出机理。结果表明，3种产品浸出规律一致：铅浸出量随时间增加先增加后减少，浸出4 h时浸出量最大；温度对铅浸出量影响显著，铅浸出量随温度的增加持续增加；铅在强酸性环境的浸出量大于在强碱性环境下的浸出量，在偏碱性环境下的浸出量最少。     

聚酯类增塑剂的合成与应用研究进展

综述了国内外聚酯增塑剂的合成及应用的最新研究进展，重点介绍了超支化、生物基、石油基聚酯增塑剂的合成与制备方法以及不同类型聚酯增塑剂在聚氯乙烯(PVC)、淀粉、聚乳酸、聚氨酯弹性体与橡胶制品中的最新应用研究进展；并对聚酯增塑剂未来发展方向做了展望。     

Reverse iodine transfer polymerization of vinyl acetate and vinyl benzoate: synthesis and characterization of homo‐ and copolymers

Homo‐ and copolymers of vinyl esters including vinyl acetate (VAc) and vinyl benzoate (VBz) were synthesized via the reverse iodine transfer radical polymerization technique. Polymerization was carried out in the presence of iodine as the in situ generator of the transfer agent and 2,2′‐azobis(isobutyronitrile) as the initiator at 70 °C. Reverse iodine transfer radical homopolymerization of VAc and VBz led to conversions of 76 and 57%, number‐average molecular weights of 8266 and 9814 g mol^?1 and molecular weight distributions of 1.58 and 1.49, respectively. The microstructure of the synthesized polymers was investigated in detail using gel permeation chromatography, ¹H NMR, ¹³C NMR and distortionless enhancement of polarization transfer (135° decoupler pulse) techniques. Relatively narrow molecular weight distribution and controlled and predictable trend of molecular weight versus conversion were observed for the synthesized polymers, showing that reverse iodine transfer radical homo‐ and copolymerization of VAc and VBz proceeded with controlled characteristics. Results of molecular weight and its distribution along with the ¹H NMR spectra recorded for homo‐ and copolymers indicated that side reactions can occur during the course of polymerization with a significant contribution when VAc, even in a small amount, was present in the reaction mixture. This can result in polymer chains with aldehyde dead end and broadening of the molecular weight distribution. © 2015 Society of Chemical Industry     

Poly(4‐vinyl pyridine)‐grafted graphene oxide for drug delivery and antimicrobial applications

Graphene oxide (GO) was covalently functionalized with poly(4‐vinyl pyridine) (P4VP) by atom transfer radical polymerization for drug delivery and antimicrobial applications. The physiochemical properties, chemical structure, composition and morphology of the P4VP‐functionalized GO (GO‐P4VP) were studied. Simple physisorption of a cancer drug, camptothecin (CPT), via π ? π stacking and/or hydrophobic interactions on the GO‐P4VP was tested for drug loading and its release by altering the pH. The GO‐P4VP has low cytotoxicity, and the CPT‐loaded GO‐P4VP exhibited a high potency for killing cancer cells in vitro. Prominent antimicrobial properties against Escherichia coli and Staphylococcus aureus were also observed. Thus, the GO‐P4VP can be utilized as a drug delivery vector with high biocompatibility, solubility and stability in physiological solutions, a suitable payload capacity and excellent bacterial toxicity. Owing to its small size, low cost, large specific area, ready scalability and useful non‐covalent interactions, GO‐P4VP is a novel material for biomedical, industrial and environmental applications. © 2015 Society of Chemical Industry